1 / 8
Sony Kitlens Lenshood with integrated cover — zdjęcie 1
1 / 8

Sony Kitlens Lenshood with integrated cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lenshood for your Sony kitlens with an single or double integrated lenscover

Ocena
0 / 5
Polubienia
8
Pobrania
35
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
This is a lenshood for the Sony Kitlens. It is obviously inpired by the many square hood desings out there. 

 

To assemble the hood, you need a screw-on filterring with a M40.5 thread. The standard design is made for the K&F filters with am outer diameter of 42.85 mm. Just screw the ring on and line the hood up. Then take it of again and press the hood onto the ring. Be careful to not break the little endstops.

The tolerance is pretty tight, so the hood is realy snug un the ring.

The hinge pin for the cover is just a piece of 1.75 mm filament.

If you need a different size hole, just ask, i can make it for you. Or modify the STEP file.

 

I have some other models for your Sony camera, so maybe check them out :-]

Tagi