NexGen3D: PC Status and Sensor Display - AIDA64 - HYTE Y70
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PC Sensor Display
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 34
- Makes
- 0
- Views
- 1,241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
5" Sensor Display Mount designed using the HYTE theme for the Y70 case, but can be used in others.
This mounts to the bottom of the upper 120mm cooling fans.
You will need the following:
4 x M3 Heat Inserts
4 x M3x6 or M3x8 Bolts
2 x Standard self tapping fan screws
1 x Model-B 5" Display
I recommend printing from PETG-GF or CF or ABS, I dont recommend PLA as iy may sag if the temps get warm inside the case and standard PETG might be too flexible.
The display is now connected to a Raspberry Pi 3 A+ you can find the internal mount for it here I dont recommend using a multimonitor setup via Windows as its quite problematic, your best to keep it as a stand alone device.