1 / 2
Tray for Mixing Epoxy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small simple tray and spatula for mixing 2 part epoxy. Fast Printing, easily disposable, minimal filament use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a simple tray to mix epoxy in that can be easily discarded after use. Print using 0.4mm nozzle. Base is 0.2mm thick, print at 0.2mm layer height so it prints in a single layer. Sides are 0.5mm in diameter so they print in a single pass (similar to vase mode).
Print Details:
- Parts: The model prints in 2 parts – the spatula and the tray.
- Layer Height: 0.2 mm
- Infill: 10% with grid pattern
- Supports: No supports required
- Filament: Red Bambu Basic PLA+
- Printing Temperature: 220°C
- Bed Temperature: 55°C
This printed in under 5 minutes on my Bambu P1S, this is slightly more elegant than using a sheet of paper, but does pretty much the same thing \_(ツ)_/. Happy Printing!