1 / 5
My latest Solder Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is loosely based on the Solder-Mill with a roller and hole to feed solder through.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 96
- Makes
- 2
- Views
- 441
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This design is loosely based on the Solder-Mill with a roller and hole to feed solder through.
Instructions
Print 2 of the nibs (solid) and 1 roller and 1 base. I would make the roller around 20% infill and the base solid.
Then glue the nibs into the end of the roller, if you print in ABS (preferred) then you can just use a few drops of acetone, the rounded end of the nibs point outward.
Simply feed solder through hole in front, slide roller into roll of solder and slide into place.
Category: Tool Holders & Boxes