Dispenser for Priority Mail Roll Labels.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's best to mount this to a table using 2 screws (holes are in bottom). Once you feed the label through the peeling…
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 190
- Makes
- 1
- Views
- 1,066
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
It's best to mount this to a table using 2 screws (holes are in bottom). Once you feed the label through the peeling section you just pull on the loose end and a label pops out the top.
Instructions
Print how you like but I would print with a high infill.
Pull label through top slot and then feed back into next slot down, it will come back out the bottom slot. Pull and next label will peel off and be dispensed.
Note, I had to run sandpaper inside my slot facing inward as the back curve printed a little sloppy.
Category: Tool Holders & Boxes