Printbed-friendly Pry Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small pry bar for getting stubborn parts off the print bed. The hope is that the rounded fulcrum will ding…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 88
- Makes
- 0
- Views
- 1,093
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is a small pry bar for getting stubborn parts off the print bed. The hope is that the rounded fulcrum will ding my bed less than a sharp angled one would. Works best on parts with some kind of chamfer or lip at the bottom.
I have a PEI bed, and print a lot of wide flat parts that can be a pain to get off. To avoid that first "sharp" layer from hotter/low printed first layers, I usually add a chamfer to the base of my designs. This pry bar gets under that chamfer and helps pop prints off.
Printed in PETG, 40% infill. I used 3 perimeter layers for extra strength in the tip. Printing with a smaller extrusion width will give you a sharper tip.
Category: 3D Printer Accessories