120mm Tinker-Friendly LACK Riser For Printer Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Taller remix of Zuspiel's Lack enclosure feet to fit my larger printer. Easily lift off and replace the top half.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 105
- Makes
- 1
- Views
- 785
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Taller remix of Zuspiel's Lack enclosure feet to fit my slightly larger printer inside.
The design allows the top table to simply be lifted off for access to the printer. In all I spent around $30 for the whole thing - $24 for 2xLACK tables and a picture frame with acrylic (to use as the door), and the IKEA screws. For now, the enclosure is walled off with surplus cardboard from IKEA, which was free, but a little ugly.
The legs add about 120mm of height to the top lack table. I recommend using this drill jig to precisely mark the 16-32 holes you'll have to drill in the table / bottom of the legs. The screwdriver holes will fit a 10mm diameter shaft, which was big enough for mine.