1 / 2
Captain Bruce Upgrade for 3D SETS Family - Ann & Bruce — image 1
1 / 2

Captain Bruce Upgrade for 3D SETS Family - Ann & Bruce

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Transform your 3D SETS Family - Bruce as a character of Captain Haddock

Rating
0 / 5
Likes
3
Downloads
40
Makes
1
Views
343
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Warning

It is small parts (especially for this character), it is working on my side but sometime according your printer and your setting it could provide a poor result.

Definition

None.

Printing

Is required the same printer size than 3D SETS has defined.

Infill 15% and layer 0.15mm is fine.

It works without support.

For the cap, start with the black color, change color to yellow at 2.45mm, go back to black color at 3.5mm, change color to yellow at 3.8mm and switch to black at 4.85mm.

For the pipe change color to red at 3.80mm.

Build

Use 3D SETS Family universal connector.

No screw, may be some glue could be fine.

Cut to adjust the beard

Feedback

It is welcome, post your builds.

Remark

None.

Version

v1/v20240809 1st upload.

Tags