Pinball Coin Door Return Button Mod for lighted buttons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modify a coin return button on an angled pinball coin return button to use a lighted button instead for virtual pin.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 499
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
I'm working on modifying a Judge Dredd pinball cabinet into a virtual pinball machine. I want to re-use the coin door I got with the cabinet (despite it being bent up), and also use the coin return buttons as “add credit buttons” that were lit by LEDS. I already have some buttons I can use for this so I just needed a way to make them work with the covers for the coin return buttons.
Lots of iterations later and voila.
The plunger replaces the plunger that comes with the buttons. I also don't use the lens or the back cover for the buttons.
Printing Instructions:
- .2 mm layer height for best results
- Use Supports
- The plunger should be printed on its side. This adds strength to the arms and prevents them from breaking when they flex. They're likely to snap off otherwise.
- The bracket should be printed at an angle also, to add strength.
- I used PLA (Prusament Vanilla White) which worked great.
- I printed at 20% infill
I can't guarantee they will work for everyone. The coin door I have is slightly bent and that may have impacted the angles. If the plunger seems to stick or rub along the edge, try loosening one of the screws slightly.