Adjustable Universal Fatshark 600TVL Camera Mount [sticky mount]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I just designed a universal Fatshark mount based on the source below. Printed it to stick the Camera on an Phantom.…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I just designed a universal Fatshark mount based on the source below.
Printed it to stick the Camera on an Phantom.
You can stick the Camera mount with "3M VHB".
You also need a M3x25 Screw and nut.
maybe fatshark 700TVL also work. But did not tested it.
Please upload a photo of your make.
This design is not for commercial use or selling!
Du möchtest dieses Teil haben? Schreib einfach:
Facebook: http://www.bit.ly/contact\_ps915
Unterstützte meine Arbeit / Support my work:
Thanks! =)
Instructions
Printed 0,2mm Layers PLA.
Support just on the inside of the Camera mount.
Category: R/C Vehicles