Counting matching models…
2019-06-26: Since there are people selling my design around the world for the AKK Diversity RX i must assume that is compatible. Hope the people find it useful for this module too. Furious FPV True D V3.5 replacement cover for Fatshark…
This is a cover for the Eachine PRO58 diversity module. The module goes into the cover, then the cover into the goggles. It has clips which will prevent it from falling out of your fatsharks while you fly. No tape needed! I designed this…
A remix FatShark diversity RX cover with adjusted button and screen clearance for the AKK diversity module. Credit to “FasaArg” for the excellent original design.
When I first printed the original model and attached the Walksnail VRX to it, I found the VRX didn't quite sit flush on my Fatshark Attitude V6 due to the length of mount, so I added a couple of millimetres to give it some more space.…
UPDATE 11 April 2023: I have added .3mf and .step files of a modification that will fit the new Avatar Pro camera (the one that works in super low-light, it has a longer lens so it needed some extra material in the tunnel, otherwise all…
Fed up with cables hanging off your face? Worried about the HD-Zero power cable frying? want to be able to easy switch between analogue and digital? This is my design for a module to fit into existing googles that you can feed power in…
This is a Fanguard for the Fatshark Faceplate Customized version of http://www.thingiverse.com/thing:128718 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=128718 Please upload a photo of your make. This…
I remixed Xerpocalypse's fan shroud design to add the Team Blacksheep logo. The logo can be printed in a different color by adding a filament change 4 or 5 layers before the top at 0.1mm layer height. This was printed with a 0.25mm nozzle…
A small Case for the Eachine PRO58 Diversity Receiver for my Fatshark Attitude V2. Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: No Resolution: 0.20 Infill: 20% Filament:…
Today my Fatshark Sharkbyte fpv bundle arrived. Unfortunatly the fan-mount for the reveiver unit was missing so i had to print one by myself. I´ve testet the fan-mount on Fatshark Dominator HDO2 goggels and Fatshark Dominator HD3 goggels.…
This is a cover for the Realacc RX5808 Pro Plus module. Fits very snugly and covers completely around all the edges. Printed with nylon Taulman 910 alloy or PETG. Module snaps into the case/cover and then snaps into your goggles. I…
A simple mounting option to attach 2 TrueRC air X² antennas to the Walksnail Avatar or Fatshark Dominator HDO3. The mount is screwed to the two upper (omni) antennas. I've used carbon fiber reinforced PETG to print, but other filaments…
This is a diversity module cover for the Eachine Pro58 module (achilles module) in a Fatshark Dominator HD / HD2 / HD3 nd should fit other models like The Dom v1 to v3 series. I got the idea of the pattern from an other project on…
Fatshark HDO 2 Lens Cover :P Print Settings Printer: Craftbot Plus Rafts: No Supports: No Resolution: 0.3 Infill: 15 Filament: Cheap TPU TPU Black Category: R/C Vehicles
Want to block out the light that comes in from the strap gap on the Fatshark Dominator FPV goggles? Well, so do I. These are super easy to attach and to remove. Simply slide through the strap and snap into the strap hole. The light comes…
I bought two Floureon Lipos for my Skyzone FPV Goggles. To easy change and hold the lipo on the googlestraps, i designed this lipo holder. Install: clip the lipo holder on the googles straps. You can leave it there. to swap lipo, just…
Thank you Shawn Morrison ~ LetsFlyRC ♥ -- Changes: ● Reduced wall in front of antenna to 0.8mm ● FDM printable ● M2 Heat-Set Inserts ● Simplified What you need: 4x M2 Heatset insert 2x M2 20mm (or longer) 2x M2 16mm (or longer)…
This is a design for a flexible housing or cover that protects the Furious FPV V3 module when used in the Fatshark Attitude V3 FPV Goggles. It offers some impact and weather protection over running the module uncovered and adds some…
This is a remix from https://www.thingiverse.com/thing:2922203 I made it 1mm thinner so it is fits on SKY01 now. And it is more flexible you can print with PLA and it will not break when you bend it during installation. It has a hole to…
I just designed a universal Fatshark mount based on the source below. Printed it to stick the Camera on an Phantom. You can stick the Camera mount with "3M VHB". You also need a M3x25 Screw and nut. maybe fatshark 700TVL also work. But…
This is a cover for a common cloverleaf antenna. Mostly used for FPV racing antennas. Snaps right onto the antenna base. No glue needed. Print Settings Printer Brand: Wanhao Printer: Duplicator 6 Rafts: Doesn't Matter Supports: Yes…
One more variation of Fatshark lens covers, this time for Dominator V2 goggles. The longer version is extended by 3 mm. Print instructions Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 20%
This is a holder that slips around the Fatshark Dominator v2 battery and strap. Way cooler than a rubber band! Print at 50% or better fill with a couple of shells. The walls are thin, so you may need to adjust as needed. Category: R/C…
This is a model to protect the lenses of Fatshark goggles from scratches and direct sunlight. It's designed for easy and fast printing with minimal TPU usage. It fits into the slots for the diopter correction lenses.The TPU link between…
Mod for Walksnail Avatar Goggles that allows for 4 patch antennas on the outside at the front. This eliminates the need for 90° adapters at the top of the goggles and it saves some space there too. Print on its front, use PETG at 0.2mm.…
Furious FPV True D V2 replacement cover. Since the old Cover was big and clunky, I decided to make my own. This is what I came up with, a simple and space saving solution. It is a very snug fit, so don't take it out and put it back in…
Here's my FatShark Attitude V2 Box to carry and store my Googles savely. It's designed to hold the google with my Faceplate and a mounted RX-Module. There's a Cover with RotorRiot Logo for MMU/Multimaterial print and a version without…
Triple feed 150mm antenna support for Fatshark HDO 2. With this support, the antenna can be easily removable from goggles.
Module bay door for the "Realacc RX5808 Pro Diversity Module Since there was no door available for the when I ordered mine I immediately began to design my own. Now Realacc offers a injection molded door but in my opinion it is not quite…
Print the small part in rigid filament, and the big part in TPU for a nice fit of the sliding assembly mechanism (and for the SMA extension hex part). The small part goes below the faceplate fan of the Fatshark Goggles, you have to remove…
This is a pod I made for my old balsa wood glider RC plane called "Blue Phoenix" from hobbyträ Sweden. It´s designed for this camera gimbal But other gimbals that uses a servo of same size as base should fit, no guarantee though.…
From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos with battery level indicator, I designed a case to go with it. It is an extremely tight fitting design and I recommend you…
Exactly the same part as the original, simply without the text "FPV". Thanks to the original creator! Category: R/C Vehicles
Clips that attach to your fatshark goggle straps to hold an HDMI cable for use with the prosight base station. I like the HDMI cable to go out the back, these clips take the strain off the hdmi connection on the goggles hopefully to…
i wanted to mount the Fatshark Faceplate on the Skyzone. So i designed a clip and printed it with my Mendel90 3D Printer. You can buy it here: http://bit.ly/skyzone\_clip Here you can the the article about that mod on my blog (german) On…
I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks. You also have a little space on the outside to mount a capacity/voltage indicator board (I used one from banggood for 2s) Today I got the cells and installed them.…
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
This is a prescription lens mount for the Fatshark HDO2. If the focus power adjustment in the goggles is not enough to help you see a clear image, you are like me and need special prescription lenses to see clearly. Such as those with…
Attaches using the holes in the bottom RCMC Taranis dock. RCMC Taranis dock found here: https://www.thingiverse.com/thing:1323103 Print instructions Category: Hobby Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports:…
Printer Prusa Mini+
This is a remix. I added a fatshark 600tvl Mount You can use this Servo: http://www.hobbyking.com/hobbyking/store/\_\_663\_\_HXT500\_6\_2g\_0\_6kg\_08sec\_Micro\_Servo.html Or this:…
Il suffit de glisser la pièce dans la fente du masque.
Made this to adapt old school closed loop goggle straps to hdz goggles. you could scale in the slicer for other goggle
Fatshark button cap to prevent accidental pushed on the left joystick. Category: R/C Vehicles
This model is a remix from Thingyverse: https://www.thingiverse.com/thing:4594800 V2 is more rigid + the blend files are cleaner and easier to edit. First You have to open up the goggles. It is held by two screws, I also unscrewed the fan…
UPDATE: Happy to pop the lenses out of the assembly? You might prefer this print instead . This print lets you fit FatShark-style diopter lenses onto your HDZero goggles with the regular faceplate . No need to print a whole custom plate…
Print in PETG with a new flange to reduce the entry of light Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Amazon Basic PETG Transparent Blue Category: R/C…
This was designed to work with the Fatshark 600tvl camera and a 9g servo. For the hinge, one can use a thin steel wire or similar rod. The gimbal can be mounted facing up or down. I'm looking for someone to test this for me. Also, someone…
Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity. Make sure to check the pictures for printing orientation and support structure. The snapping hooks are modified, as the original design would not fit…
This is a simple hack which allows you to connect an XT60 battery to the fatshark dominator goggle family without voiding your warrany. You'll need: an Amass XT60H male connector, a 2S balancer plug, a 5.5mm DC jack plug, the printed…
https://www.thingiverse.com/thing:1498439 & https://www.thingiverse.com/thing:3839719 combined Category: Hobby
This is designed to have be mounted on any surface: horizontal, vertical, and upside down. The base screws into the casing with small screws that came from a 9 gram servo. Category: R/C Vehicles
Another box for Fatshark Batteries. 2 18650 batteries should fit on the inside with the snap on lid. did not have time to print yet. Category: R/C Vehicles
I wanted to try this pyropatch to make my goggle super compact. They are 30$ which is not bad. Then I saw the 20$ that does not come with the 3D printed part. I then ask myself, let's say I am paid 10$ an hour, can I design that part in…
This is a cover for a custom power supply for my fatshark goggles. The case is designed to enclose two Turnigy 5000 mAh cells (single) that have been wired in series to make a high capacity 2s battery. It should only require one 16mm m3…
Hallo! Hier wird ein Case für den FPV Diversity Empfänger HB5808 von Quanum angeboten. Es besteht aus mehreren Teilen da auch der Empfänger aus zwei Funkmodulen die über ein Kabel verbunden sind besteht.…
I love my Fatsharks but the fit was really bad as I have a narrow face. These adapter stick to the face plate under the foam to narrow the gap at the sides. These are 10mm at the widest part but if you want them smaller just set the Z…
UPDATE: I was not liking having the module on the side of the goggles, so I came up with an adapter that "hangs" on the 2 stock antenna mounts, I printed some antenna caps to hold it down, works very well, file ending in - Front Mount. It…
TPU mount to hold the USB-C cable firmly in your goggles. You can purchase direct from www.quadsensei.com
Check out V2 : http://www.thingiverse.com/thing:1236390 FatShark Module Protector Protect your fatshark module while carry it If you have more than module you need it see last photo to know how to remove module in correct way Category: 3D…
This is an adapter to install an hs1190 (foxeer arrow in my case) on a Fatshark pan and tilt. Print Settings Printer: Anet a8 clone Rafts: No Supports: No Resolution: 0.4 Category: R/C Vehicles
Diversity receiver antenna support, to prevent antenna from rotating by itself when in use. Fits in a custom zip container from Wallmart without removing SMA adapters. Category: R/C Vehicles
Did a drawing for mounting the FatShark 600TVL to the XuGong Pro/V2
gives your battery pack a bit more tension in the goggle strap
Box for Fatshark power cable box. 1 x XT60 1 x MP2307 Mini360 regulator. 1 x 0.28 Inch 2.5V - 30V Mini Digital Voltmeter. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Infill: 5 Filament: 3dPrintz PETG Black…
This is a case that is designed to fit in to the elasticated section of my FatShark goggles. It's really simple to use - fit the buck converter in place, hot glue for stress relief on the wires and then use 2 - 3 cable-ties/zip-ties to…
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8NsqLPmX7sL Category: 3D Printing
This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung ZX-250 quad frame. The flange is printed 0.2mm wider with a 0.5mm support. Once printed and cooled, you have to twist the…
fits a 10 pin socket and a small perf board to give it strength (about 3 holes wide, might need to sand it to fit fits the boost converter linked, has a cutout for wires…
This is a replacement fan mount for fatshark Dominator V2 for this thing: http://www.thingiverse.com/thing:1109091/#made Category: R/C Vehicles
The "Walksnail Fatshark Avatar Goggle Shim" made by iamnoland is great to avoid dirty lens on the fatshark/walksnail goggle, but his design is slightly too thick for my head: Goggle are tilted down too much resulting in a blurry upper…
Print with 95A TPU at 0.2 layer height
Replacement cap/flange for the antenna on the Fatshark Scout FPV Goggles. Mine were made around 2020/2021, not sure if newer models are the same.
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
FatShark Fan Guard - theFPVgeek edition Category: R/C Vehicles
I made my verry first battery case for my fatshark fpv goggles. Ihope you like it. This will be my first venture in 3d, 3d printing and fpv and I hope for more . Iwill update the file for more improvements.
Storage box for diopter lenses. It is designed for inserts used in Fatshark HDO1 goggles.
The stock mount designed by PyroDrone is pretty great, but I wanted to update it a little to suite my tastes. This mount is strong, light and utilizes the stock fan cover and screws - just don't tighten too far since there's fewer threads…
This is an improved bay door for the realacc Rx5808 pro plus sold at Banggood.com. It is inspired from the great work done by @DonBowlissimo. Some minor changes for the module to fit better and fit snugly in the RX bay. Also the cut out…
This is a super easy and light mount for the Fatshark TVL600 FPV-Cam. I designed it with an 15 degree angle for my FPV-Racing Quad ( http://fpv-community.de/showthread.php?46099-CNC-Fr%E4sservice-f%FCr-mini-h-quad-gesucht-Carbon ). For…
Add this to lipos and Li-Ions for better grip in Fatshark strap. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Made this to protect my fatshark screens from sun and possibility of something touching the lens while not on my head. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2 Infill: 20-80 Notes: meant…
I remixed dmcke5's excellent 18650 Fatshark case with cell checker with the following goals: Combine bottom and body into a single piece Secure top with M2 screws Reduce the need for supports by flattening top and bottom (I prefer to keep…
Hallo! Das ist ein Case für das Eachine ER32 5,8 gHz RX Modul von Banggood, angepasst für die Videobrille Fatshark RCV 922 Base. Empfänger: http://www.banggood.com/Eachine-ER32-5_8G-32CH-Wireless-AV-Mini-Receiver-p-1007771.html Da ich in…
A nice cover for your Fatshark FPV goggle, so you can put your antennas, battery and other stuff into the case and don't have to worry to scratch the optics. Also this cover protects against sunlight. As additional feature i added a…
Hello FPV Pilots and Drone Racers out there! Ever ran out of fat shark batteries at the flying field and still have flight batteries around? Here is another solution. Build a converter from flight batteries to 8.4V output to run your…
This my Update from the Goggles here https://www.thingiverse.com/thing:4854980 I added another Receiver Case for Fatshark Format like Eachine Pro58. And most of all I added a storage box. The main parts are made of wood. For detailed…
For Fatshark RCV922 Aviator. Modded to plug in other receivers. Designed a cover for the RX in Fusion360 F360 source: http://a360.co/2yLZIpi Print instructions 3 perimeters
This battery holder is designed for Fatshark Li-Po battery pack 1800mAh. Within a time I noticed that battery is loosen and completely fall out from my Fatshark HDO goggles strap. This holder scures battery firmly in a Fatshark goggles…
A simple 2 piece holder for Fatshark FPV goggles to use 18650 Batteries. You need; 2 cells 2S balance plug and wire,…
Clips to hold the Fatshark battery so it doesn't fall off. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: R/C Vehicles
Fan cover for Fatshark goggles. Designed to print the logo in a different colour, hence the need for support material. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 0.1 Infill: 20% Category:…
More info at: http://aame.work/2017/12/24/fatshark-goggle-audio-modding/ Print instructions Category: R/C Vehicles Summary More info at: http://aame.work/2017/12/24/fatshark-goggle-audio-modding/
i made this to fit my fpv cam in my u bracket of my drone Category: R/C Vehicles
For Fatshark RCV922 Aviator. Modded to plug in other receivers. Designed a cover for the RX in Fusion360
FatShark Module Protector V2 Full Cover Protect your fatshark module while carry or store it If you have more than module you need it Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: Doesn't Matter Supports: No…
Designed to velcro onto the body of an rc car. Uses 2 M3 bolts and a M3 set screw. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: R/C Vehicles
Another holder for 18650 based DIY battery for fatshark goggles. Print Settings Printer: 3novatica gate Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 30 Filament: n/a PLA Category: R/C Vehicles
![Adjustable Universal Fatshark 600TVL Camera Mount [sticky mount]](https://media.printables.com/media/prints/97006/images/987979_c85c9d4c-6a09-4b50-9334-d94a50ee7ce6/fat_1_display_large_97006.jpg)
