1 / 11
Fatshark Lipo Case for NCR18650 mod — image 1
1 / 11

Fatshark Lipo Case for NCR18650 mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos…

Rating
0 / 5
Likes
8
Downloads
33
Makes
0
Views
358
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos with battery level indicator, I designed a case to go with it. It is an extremely tight fitting design and I recommend you only try this if you are great at soldering. Not for beginners, and I may design a simpler version for newbies in the future if enough requests.

What you need:

  • 2x Panasonic NCR18650B 3400mah batteries (ebay, amazon)
  • 2s Lipo Battery Voltage Display Indicator Board (banggood, ebay)
  • 2S Balance plug (ebay, amazon)
  • 5.5 x 2.1mm DC Power Male Jack right angle (ebay, amazon)
  • cyanoacrylic glue or 2-parts epoxy
  • hotglue

Tips:

  • You do NOT need to dremel the ends of the battery to get the wires to adhere, a simple metal file or sandpaper will do the trick to remove the oxidation layer for solder to wick.
  • Use thin wires for the voltage indicator board as to fit inside the casing
  • inject a bit of hot glue where the power lead and balance plug exits to keep it in place from being tugged on.

Category: R/C Vehicles

Tags