1 / 11
Fatshark Lipo Case for NCR18650 mod — zdjęcie 1
1 / 11

Fatshark Lipo Case for NCR18650 mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos…

Ocena
0 / 5
Polubienia
8
Pobrania
33
Wydruki
0
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos with battery level indicator, I designed a case to go with it. It is an extremely tight fitting design and I recommend you only try this if you are great at soldering. Not for beginners, and I may design a simpler version for newbies in the future if enough requests.

What you need:

  • 2x Panasonic NCR18650B 3400mah batteries (ebay, amazon)
  • 2s Lipo Battery Voltage Display Indicator Board (banggood, ebay)
  • 2S Balance plug (ebay, amazon)
  • 5.5 x 2.1mm DC Power Male Jack right angle (ebay, amazon)
  • cyanoacrylic glue or 2-parts epoxy
  • hotglue

Tips:

  • You do NOT need to dremel the ends of the battery to get the wires to adhere, a simple metal file or sandpaper will do the trick to remove the oxidation layer for solder to wick.
  • Use thin wires for the voltage indicator board as to fit inside the casing
  • inject a bit of hot glue where the power lead and balance plug exits to keep it in place from being tugged on.

Category: R/C Vehicles

Tagi