fatshark receiver module dock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
fits a 10 pin socket and a small perf board to give it strength (about 3 holes wide, might need to sand it to fitfits…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
fits a 10 pin socket and a small perf board to give it strength (about 3 holes wide, might need to sand it to fit
fits the boost converter linked, has a cutout for wires
i used eachine vr006 goggles
powered the boost converter straight from the external battery (two 18650 cells in parallel, connected to the stock battery connector on the mainboard)
the video goes to the video in port on the goggles, the stock receiver is still intact so you can switch between it and the external receiver
Print Settings
Resolution:
0.25
Infill:
10%
Category: Hobby