Remix – Remix – Voron V0.1 V0.2 Klipper Expander Cable Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yo Dawg! We heard you like remixes so we remixed your remix, so you can remix while remixing!
- Rating
- 4.667 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 3
- Views
- 309
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cable duct for Voron V0.1 or V0.2 that houses the Klipper Expander.
Klipper Expander allows you to add additional functionality to your V0 / V0.1 when using an SKR Mini or SKR Pio board.
It's mounted to the rear panel using VHB tape.
The Expander is held in place with 2x M3 bolts.
Lid is held to the base with 4x M3 bolts.
You'll need 6x Voron standard Heated Inserts M3 × D5 × L4.
Klipper Expander by Timmit99:
https://github.com/VoronDesign/Voron-Hardware/tree/master/Klipper_Expander
P.S.
Sorry for lack of mainboard and PTFE tube on my pictures, my SKR Mini decided to torch itself. 😅