1 / 6
Arduino Uno Case | Arduino Uno R4 WiFi and Minima
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Arduino Uno R4 WiFi or Minima with screw mounting
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 325
- Makes
- 0
- Views
- 1,173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Case for the Arduino Uno R4 WiFi or Minima.
There are different variants for the top case depending on which connectors are needed. In the images you see the ArduinoCase_Top_all.stl and ArduinoCase_Bottom.stl
The case can be mounted and secured onto a plate through the holes.
To screw the case together, M3 threaded inserts and M3x12 Screws are required.
However, it also holds together without screws.
Recommended: 0.2 mm layer height