1 / 5
Meta Quest 3 Valve Index BMR Speaker mount for BOBOVR M3 Pro — image 1
1 / 5

Meta Quest 3 Valve Index BMR Speaker mount for BOBOVR M3 Pro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a over the ear headphone mount for Quest 3. Requires Valve Index BMR Speakers and Hummingbird BMR Adapters.

Rating
0 / 5
Likes
11
Downloads
38
Makes
0
Views
1,736
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Overview:

This is a remix of sekazi's BOBOVR M2 Pro Hinge Lock for Quest 2, MMImodular's AIAIAI Hummingbird mount and MMImodular's Picoamp case.

This is a over the ear headphone mount for Quest 3's BOBOVR M3 Pro strap, it should work on M2 Pro and other headsets technically that use those similar straps. Enabled by using Valve Index BMR Speakers and MMImodular's Hummingbird BMR Adapters.

Step files are provided, if you like to change the models to fit your needs :)

Printing Settings:

Nothing special, I just printed on 0.08mm high quality preset of Bambo Studio Slicer. You might want some brims on the small parts, so it sticks to the bed. You shouldn't need any supports for any of the models, just align flat side of them to the bed.

Full Build Prerequisites:

Optionally I recommend a USB Hub with downstream power ports, if you want to charge the headset and use BMR speakers at the same time.

Mount only Prerequisites (Obviously you need the BMR speakers):

  • 2x M2*12 Screw (I used this kit)
    • The size of the hole is 2 mm, you could use other screws by adjusting the hole size in the step file.

This is not a must-have, depending how you want to make your own Hummingbird Headphones, you might want different parts. Read about Hummingbird Project here.

Regarding the edited version of the Picoamp case. It technically has two holes on the back that can be used for mounting but I personally just glued it to my USB Hub.

Mount Assembly Instructions:

  1. Unscrew the original BoboVR hinge and remove it.
  2. Use a M2*12 screw and screw the Base, Hummingbird BMR Adapter, Top and BMR Speaker in that order on each side.

Special thanks to Matt (MMImodular) which made this even possible in the first place for me to do and my friend Sctanf, for their awesome original Picoamp project.

Tags