1 / 1
FlightSimBuilder GNS530 base for Honeycomb Bravo Throttle Quadrant
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount FlightSimBuilder GNS530 to your Honeycomb Bravo quadrant.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 859
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Usually the Honeycomb Bravo quadrant is placed to the right of the yoke. This model let's you mount the FlightSimBuilder GNS530/GNS430 at an angle to properly see the screen.
I included 2 models for you to choose. The difference is how much of an angle you need the GNS530 at. This depends on your setup. In my case I used the 74 degrees angle (i.e. more angle than the 81 degrees).
I printed in PLA. No support is needed.