1 / 3
Cleveland Software Design Service Board Bracket (unofficial)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount it inside your coin door
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 46
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
A simple bracket for mounting the Cleveland Software Design service board inside of the coin door. A ribbon cable comb is modeled in to keep things neat and tidy. Be sure that you connect the ribbon cable to the same pins on the PinOne after reconnecting.
Printing
- Print it upright for no overhangs
- When printed upright no supports are needed
- Add a large brim (5-10mm or so) to keep things stable
BOM
- (3) M3 x 6mm socket head screws
- (3) 3x4.5x5mm heat sets