1 / 4
Corner Radius Jig - Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used a readily available parametric case and designed an insert to fit.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 226
- Makes
- 1
- Views
- 1,821
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Using a readily available parametric latching box I was able to design an insert to hold everything and store it. Use a piece of 1.75 TPU filament as a seal. I did put a few drops of superglue to hold it in place.
Link to box files. https://www.printables.com/model/577125-rugged-box-with-handle-1-file-and-all-parametric
***One file has all the box parts in 3mf file. You will need to duplicate 1 latch though.
***The inserts is upladed as an stl file. No need to resize anything.
To assemble the box, you will 4-M3x30 and 2-M3x45 screws.