MOX Box modified parts to add a fan
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.66 – €0.80 net (excluding VAT)
For file: mox-box-front_0.2mm_PETG_MK3S_49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.73 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 48.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
How to add a fan to a Turris Mox
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 921
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print.
The Turris Mox is an modular, open source and secure router.
Even though this is a great router, it tends to get hot and reboot. To fix it, I used FreeCAD to import/modify 3 parts of the official MOX box and voilà.
Now, I can add a fan into it to pull out the hot air outside of the enclosure.
Depending of the fan you've chosen, you may need 4x20 bolts + nuts.
Official printable parts are available on Thingiverse.
More information about how I get into this here.
Note :
- The alignment of the holes is not perfect. I don't need nuts.
- I use PETG and not PLA but it's up to you.
- You may want to print the covers one by one.
- Don't mind the glitch on the side of the mox-bottom.