MOX Box modified parts to add a fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
How to add a fan to a Turris Mox
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 920
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print.
The Turris Mox is an modular, open source and secure router.
Even though this is a great router, it tends to get hot and reboot. To fix it, I used FreeCAD to import/modify 3 parts of the official MOX box and voilà.
Now, I can add a fan into it to pull out the hot air outside of the enclosure.
Depending of the fan you've chosen, you may need 4x20 bolts + nuts.
Official printable parts are available on Thingiverse.
More information about how I get into this here.
Note :
- The alignment of the holes is not perfect. I don't need nuts.
- I use PETG and not PLA but it's up to you.
- You may want to print the covers one by one.
- Don't mind the glitch on the side of the mox-bottom.