Leveling feet with mild shock absorbing capability for Snapmaker J1/J1S with Construction Zone Caution theme
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If your 3D printer is a constant "construction zone" why not replace the feet on your printer with the yellow/black…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If your 3D printer is a constant "construction zone" why not replace the feet on your printer with the yellow/black construction caution theme.
This replaces the four feet on the bottom of the Snapmaker J1/J1S with feet that have a "construction zone caution" theme. There are two sizes to adapt to whatever situation there is.
I printed the black color with PLA+ and the yellow with TPU to provide some modest vibration isolation between the printer and worktable. If this is not desired the entire thing can be printed in PLA+.
This requires four (4) M6x1.0 1cm long bolts to mount the tops to the threaded insert on the bottom of the printer.
Have fun!
Print Settings
Printer Brand:
Snapmaker
Printer:
J1
No
Supports:
No
Rough (Luban)
Infill:
Medium (Luban)
Notes:
Two different heights provided to adapt to multiple situations.
Remove old feet and insert hex nut into top part and screw into bottom of printer then screw the bottom in and level the machine as necessary. The use of a bullet or bubble level is useful.
Category: 3D Printer Accessories