Notebook Table Hook
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.77 – €4.61 net (excluding VAT)
For file: Notebook Table Hook V01_0.4n_0.2mm_PETG_MK4IS_3h34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.19 excluding VAT (range midpoint).
- Weight reported by the author
- 70 g
- Print time reported by the author
- 3.57 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A practical way to store a notebook.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Print instructions:
- Material: PETG
- Layer: 0,2 mm
- Perimeters: 3
- Infill: 20%
- Infill Style: Organic
- Supports: Necessary
- Brim: No
This model requires some special settings, more details in the attached 3MF file.
Part list:
- Printed part [x1]
- Bolt M4x70 [x2]
- Washer M4 [x2]
- Nut M4 [x2]
Assembly instructions:
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
If you need to change the hole spacing, change the "outer_hole_distance" variable. Important! Please refer to the images below before measuring the spacing.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!