Shell for 100g Butane Fuel Canister UPDATED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Outer shell choices for 100g and similar 3.5in/9cm butane fuel canisters. Snug fit for protection and insulation.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 67
- Makes
- 0
- Views
- 893
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TWO PIECE:
Threaded pieces making a space for storage or a hand warmer.
ONE PIECE:
Basic protection and insulation.
Meant to slide right over the top of the fuel canister with an opening wide enough for the nozzle and a cap (eg, this cap I made). The can and shell will still fit inside a standard jetboil sized stove.
It is printable without supports. The print here is PETG+ without supports. That said it looked like a messy spaghetti squash inside. I cleaned it out and gave it a quick heat gun blast and it's fine, but glad it's the inside.
I'm including a 3MF with supports on. Not my favorite use of filament, but it's an option for a cleaner print and less post-process.
For my unsupported print, I did print with random-aligned full scarfing. I like the slight texture this gave in PETG+ at 0.28 layers — some, but less than fuzzy skin.
SLIM:
Very low profile base snaps onto the bottom lip of the can. Makes storage space that can also be used for a hand warmer.