Shell for 100g Butane Fuel Canister UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outer shell choices for 100g and similar 3.5in/9cm butane fuel canisters. Snug fit for protection and insulation.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TWO PIECE:
Threaded pieces making a space for storage or a hand warmer.
ONE PIECE:
Basic protection and insulation.
Meant to slide right over the top of the fuel canister with an opening wide enough for the nozzle and a cap (eg, this cap I made). The can and shell will still fit inside a standard jetboil sized stove.
It is printable without supports. The print here is PETG+ without supports. That said it looked like a messy spaghetti squash inside. I cleaned it out and gave it a quick heat gun blast and it's fine, but glad it's the inside.
I'm including a 3MF with supports on. Not my favorite use of filament, but it's an option for a cleaner print and less post-process.
For my unsupported print, I did print with random-aligned full scarfing. I like the slight texture this gave in PETG+ at 0.28 layers — some, but less than fuzzy skin.
SLIM:
Very low profile base snaps onto the bottom lip of the can. Makes storage space that can also be used for a hand warmer.