Festool router guide bushing adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Festool router guide bushing adapter for template routing
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 80
- Makes
- 0
- Views
- 658
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Festool router guide bushing adapter.
It is designed for a Festool OF 1000 EB, but it should also work for other festool routers.
Thanks to the holes, the dust extraction works very well.
The size I made is for an 8 mm router bit, and the outside diameter is 14 mm (see picture).
Other sizes can be avaible on request.
I printed mine in PLA + with 100% infill on ender 3 V2. It is sturdy enough, but can flex a little if you push too hard.
By tweaking the outer ring with masking tape, I was able to ajust the tolerances and route a wooden bowtie inlay (see picture).