ThrustMaster Warthog Stick Riser.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed riser to raise a ThrustMaster Warthog joystick by 80 mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a riser to place my ThrustMaster stick in the second drawer of my BD-4D (Big Desk—Four Drawer). This puts the stick art at the ideal height for my flight simulators. It looks like it is wider than it needs to be so that it will fit in the drawer. I will include STEP files; you can resize it to your liking. There are small divots in the bottom of the feet for silicone no-slip buttons, and the stick is fastened down with M4 x 10 heat-set inserts and four M4 x 12 socket head screws and washers. Enjoy. If you print this ion PET-CF, you can stand on it.