1 / 4
FGC-68: display stand for TIPX mag lower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
tipx mag based marker stand
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
there are 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long
or
2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that
-
print settings:
0.2 layer height should be fine.
you can use the 6 layer walls and a 40% infill.