1 / 4
AtomRC Swordfish DJI O3 mount V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved and modified version of my original O3 mount for AtomRC swordfish
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
the upper part also works with my tail cam mount for the volantex phoenix v2 2000:
https://www.printables.com/de/model/908679-volantex-phoenix-dji-o3-tail-mount
the upper parts are actually identical
improvements:
- better look :D
- magnets instead of screws
- lower profile
- easier access
- more robust
- lighter
- angled - as is the swordfish's vtx bay
- modular
- swappable - top part fits on my volantex phoenix base too for example
printing:
- supports required for both parts sadly
- hybrid tree supports for top, snug normal supports for bottom
- 0.2mm layer height
- petg or better
- ≤20% infill sufficient
assembly:
- requires 4 or 8 5x5x3/5x5x5 neodymium magnets (press-fit)
- antenna clips in place, air unit should fit in cavity of top/bottom part
- stick base down with double sided tape
- cable should easily fit through slot
- let it (magnetically) snap together
- insert the magnets CORRECTLY, once in, you can't really remove them without destroying the part
- if you use 5x5x3 magnets, make sure they're seated flush against the mating surface
V3 might include a pan-servo integration, no release date yet, not even in the works