External GPU Enclosure (TH3P4G3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for TH3P4G3 GPU Dock. A case for my external GPU. This provides protection and a cleaner look.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 468
- Makes
- 0
- Views
- 3,684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is an enclosure for my external GPU. I wanted to protect the GPU and clean up the look using a TH3PG3 GPU Dock. I designed it around a Nvidia RTX 3090 Founders edition but it would likely work for many other GPUs. The back lid has a block that is designed to hold a temperature switch that turns on the 120mm fan when the GPU gets above 40c.
Notes:
- This model was intended to be printed on a Prusa XL or larger Printer. I wanted the body of the case to be one piece.
- I also added some rubber stick on feet to keep the case from sliding/scratching my desk.
Parts
- 4 - 4mm screws for attaching the cover to the body
- 4 - 4mm threaded inserts to go into the cover
- 1 - 120mm fan
- 4- 120mm case fan screws(I had these in my junk drawer but I think they are M5 self tapping ~10mm)
- 3 - WAGO connectors or similar wire connectors to connect the fan to the power supply
- 4 - rubber stick on feet(optional)
- Kapton tape or similar to hold the optional temperature sensor in place
Optional temperature switch that I wired inline with the fan and mounted in the lids slot. Optionally you could just wire the 120mm fan directly to one of the power supply Molex connectors.
https://a.co/d/ajBusBA