Woods real D type adapter plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate for a cable reel to accept a D type neutrik thingy
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Simple plate for a simple use. I don't like taking cables of off reels, this gives me the functionality of a 300 dollar cable reel for 50 dollars.
I got the reel from amazon: https://www.amazon.ca/dp/B0064R6D18
You will need to drill a hole for the cable to enter the cavity. Drill it twice as large as the cable needs and after drilling straight, turn your drill on an angle to bevel it and prevent your wire from kinking. A rubber grommet might also be a good idea.
Current screws I used are M3x10, but m4x8 or m4x6 would probably not need any nuts glued.
I'll add an M4 version, or other versions when the time comes to make another one.
Print it flat on the bed, supports for the screw holes is recommended. I printed it on a Prusa mk3s with a 0.6 revo nozzle on 0.4mm layers.