Miata NA 5-Speed Transmission Tunnel Shifter Hole Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover for the NA Miata transmission tunnel when the shifter and/or transmission are removed to prevent bugs, cats, etc
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
While performing major repairs on your NA Miata that require the shifter and/or transmission to be removed you are left with a hole to the outside. Watching a YouTube video recently I learned of an enthusiast who did not cover a similar hole in his 240SX and kittens decided to take up residence and ruin his interior with their . . . discharges. So here is my solution for the NA Miata I had outside. No more worrying about kittens, bugs, or whatever else entering the interior from outside.
My print was done with some cheap PLA I had laying around and was 5mm thick. I have reduced the model to 2.5mm as that is more than enough. Of course you can press/pull however you like in your slicer to reach the thickness you prefer.