1 / 4
Miata NA 5-Speed Transmission Tunnel Shifter Hole Cover — zdjęcie 1
1 / 4

Miata NA 5-Speed Transmission Tunnel Shifter Hole Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cover for the NA Miata transmission tunnel when the shifter and/or transmission are removed to prevent bugs, cats, etc

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
622
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

While performing major repairs on your NA Miata that require the shifter and/or transmission to be removed you are left with a hole to the outside.  Watching a YouTube video recently I learned of an enthusiast who did not cover a similar hole in his 240SX and kittens decided to take up residence and ruin his interior with their . . . discharges.  So here is my solution for the NA Miata I had outside.  No more worrying about kittens, bugs, or whatever else entering the interior from outside.

My print was done with some cheap PLA I had laying around and was 5mm thick.  I have reduced the model to 2.5mm as that is more than enough.  Of course you can press/pull however you like in your slicer to reach the thickness you prefer.

Tagi