1 / 2
Wall Air Vent Register Exhaust Fan Mount Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
8in vent fan mounted in place of 14x8in passive register
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces a standard 14x8 vent register with a mount for a cheap $35 Amazon exhaust vent fan for active ventilation in garage / print farm space. Features:
- Built for compatibility with 8in diameter, 6in depth vent fan such as this Nalle 80W 500CFM.
- Register faceplate cover split in half and puzzle pieces together, fitting on medium to large buildplates.
- 50mm fan offset / riser to allow full depth of fan duct to fit behind mesh vent screen at wall midline.
- This riser can be adjusted in slicer by splitting or combining multiple on top of each other
- Routing for power cord through faceplate and riser, usable in upward or downward orientation.
- Screw holes for fan mounting and faceplate-to-riser 4.5mm for direct threading with M5 screws or extra long 60mm bolt through all pieces.
NOTE: Riser requires at least 250x250 print bed space unless manually split further. On Bambu printers, requires disabling filament cutter to use full build space (instructions here).