1 / 3
ESP32 A1S Speaker Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for an ESP32 A1S and speakers to use with squeezelite for multi-room audio (while being completely open source).
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 43
- Makes
- 1
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
This is a case for an ESP32 A1S audio kit + a pair of 3W speakers. This can be flashed with squeezelite-esp32 for a squeezelite streaming music player, pair that with Music Assistant/Home Assistant and you have a fully open source multi-room audio system.
Parts:
- ESP32-A1S Audio Kit
- Adafruit Stero Speaker Set 3W 4 Ohm
- M3 x 6mm screws, 8 (for speakers)
- M3 H4 heat set inserts, 8 (for speakers)
- M2 H4 heat set inserts, 4 (case half assembly)
- M2 H2 or H4 heat set inserts, 4 (circuit board)
Assembly
- Print one base and lid (with either the logo or no logo)
- Install the 8 M3 heat set inserts in the lid
- Install the 8 M2 inserts in the base
- Screw in the two speakers with the wires coming out the side with more space
- Screw in the main ESP board and connect the speakers
- Screw together the halves