Ikea Lack Table caster holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After the leg of the Lack table gave up on the weight I decided to build a reinforced piece to support the weight.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
After I attempted to build a tower or 2 Ikea Lack tables and put a huge printer on top of it the particle board Ikea Lack leg gave up on the weight and I almost dropped the printer on the floor.
Simple model on Fusion 360 to receive the 4 screws and used Glue hot gun to glue them in place.
Print one model for each leg and use 4 wood screws (half-inch or 12 mm long screws).
The caster holes are 31 mm distance, check the casters before buy them to see if they will fit.
I printed with PETG 4 walls and 15% infill. I used a manual screwdriver to go slow threading the screws to avoid cracks.