Ikea Lack Table caster holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After the leg of the Lack table gave up on the weight I decided to build a reinforced piece to support the weight.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
After I attempted to build a tower or 2 Ikea Lack tables and put a huge printer on top of it the particle board Ikea Lack leg gave up on the weight and I almost dropped the printer on the floor.
Simple model on Fusion 360 to receive the 4 screws and used Glue hot gun to glue them in place.
Print one model for each leg and use 4 wood screws (half-inch or 12 mm long screws).
The caster holes are 31 mm distance, check the casters before buy them to see if they will fit.
I printed with PETG 4 walls and 15% infill. I used a manual screwdriver to go slow threading the screws to avoid cracks.