USB Maus Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: Maus Case (MakerSun) v2_Maus Case (MakerSun) v2_Body2_0.4n_0.15mm_PETG_MK4IS_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for the Maus by MakerSun, a small, Arduino-based, USB device.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A case with a snap lid, designed to keep the Maus firmly seated.
Assumed tolerance of 0.1mm. PETG is recommended due to possible heat. Pictured with Atomic PETG Black.