1 / 5
KSGER T12 Soldering Station Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One piece shelf for KSGER/Quicko/Queeco T12 soldering station
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 49
- Makes
- 1
- Views
- 404
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I was looking to mount my KSGER T12 soldering station to the side of a cabinet to get it off the bench. I liked the idea of Jannomag's wall mount, but I wanted to be able to remove the station without loosening the brackets and/or removing the cords from the station.
Printing Parameters:
- Printed in PLA with 0.3mm layer height.
- 3 walls
- 15% Adaptive Cubic infill
- 5mm Mouse Ears on the corners. A full brim would also work. Without these, the front frame is likely to warp.
I've also made a reference model for the T12 Soldering Station if you'd like to tweak this or work on your own design.