Schneider Unica Basis/Studio base plate to accommodate IKEA Tradfri on-off switch/button
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A solution if you want to seamlessly integrate a IKEA Tradfri switch/button into your Schneider (new) Unica Studio setup
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The problem I was trying to solve was that during reconstruction we forgot to place one switch and it was simply not feasible to add it later. The solution was in using a Shelly relay in combination with a smart switch. Since we use Schneider new Unica Basic/Studio I tried to incorporate a smart switch that would fit in the switch cover. As a matter of fact, IKEA Tradfri on/off switch (and Tradfri button) have exactly the dimensions I needed.
I have created a model of a “base plate” that connects with a Unica cover and can accomodate the abovementioned IKEA Tradfri switch. It can only be used in a single cover – will not fit multicovers.
All you need to do (apart from printing the model) is to use some double sided tape to:
- fix the Tradfri switch metal plate (which magnetically holds the switch itself) to the model, and
- fix the whole thing to a wall (or leave it on a table…).
Printing was super easy:
- I used black PLA to fit the Unica cover,
- 0.4 nozzle,
- 0.2 line height,
- 2-3 perimeters,
- 15% infill,
- no supports.
If there's anything I can help with, let me know. Thanks!