135 models
A fun little project for Star Trek fans. I designed a communicator kit that is split up into separate parts. You can choose to make a solid version or one that has space for electronics. Update March 10 2026 - Finally added a holster.…
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
3D Printed Telecommunication Tower (1:100 Scale) Description: This meticulously crafted 3D model of a telecommunication tower, scaled down to 1:100, is ideal for 3D printing enthusiasts. It faithfully replicates the design of a real…
Here is a remix of the awesome Discovery communicator kit designed by mooslug . I love how the model is accurate so I wanted to make it as a static prop without electronics. I solidified the body and made the flip-up hinge mechanism…
A communication badge from Star Trek Voyager. This a quick and easy print! The size and shape of this badge should be pretty close to the original TV version. Print instructions Should print in just about any material
Panel Komunikacyjny - Zaślepka do BMS JK
I found this cool model over at the 3DWarehouse. But after mucking around converting the files, I see there has already been one done on thingyverse that looks way better and is already print proven ; ) Cheers Jace…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
Here's is my attempt at the SNW communicator. The speaker and moire have fine detail and may look better using a smaller print nozzle, but still prints fine with a regular .4 nozzle with the right settings. Use color swapping for the…
https://www.youtube.com/watch?v=rjqdaax-xRk Real Star Trek Communicator Full guide on: https://learn.adafruit.com/3d-printed-star-trek-communicator/overview Boldly go where no project has gone before with this real working Star Trek…
a rough mockup of the Clicks Communicator smartphone.
Here is my version of the wrist communicator from Star Trek: The Motion Picture. Model Notes Use supports for the body. There are 3 sizes for the bands. For the SDisplay try enabling Ironing for a better finish. Update Log November 10…
For those who want to just buy one ready to go here's my stores. Link bellow. <<Harutech Shop Here>> Buy Full Assembled here <<Etsy Shop Here>> <<Tindie Shop Here>> This is a case designed to build a standalone Meshtastic communicator…
Don't sue me!!! It's a calicat but with a horn. It's an evolutionary advantage to deal with the dreaded calicorgi. Remixed from that other place. https://www.thingiverse.com/thing:1545913 Print instructions Try it however you like!
Communicator from Star Trek: Beyond I used silky filament to get the brushed metal look. The body is centered at the origin (there is a small piece to prevent autocenter if is enabled) and printed with the "Archimedean Chords" top fill…
Check collections for other files.
Disclaimer: These models are intended for personal use only. Do not copy, sell, trade or gain from these files and designs. This means you can print for yourself, for your family members, friends and make the devices and give away the…
Hi! We glad to introduce 3d model - STL files - to print your own Communicator from Star Trek III. Model include: - 16 stl files to 3d printing (biggest part demensions: 98*60*16mm). - 1 stl files - stand for Star Trek III Communicator. -…
Here's an easy Klingon communicator to make. Uses 6x2mm magnets. No supports needed. Display stand included. Filaments Used PLA, CC3D Antique Gold and Prusament Galaxy Black and Silver. Buy prints of this model: Ancient Stone Inspirations…
Modeled after the .357 variant, based mainly off photos with a handful of measurements off a real example.
*** 2nd Edition Dice box has been added. Use the same lid and connectors and you want the files listed with 4d20 in the name. I have not printed one yet, so if you print them post some pics of them. I'll try and get one printed over the…
Aus dem Roddenberry Archiv in die reale Welt. Gedruckt mit Holz-Filament - dass läßt sich gut schleifen. Für ein bessere Ergebnis habe ich die base geteilt. Ich habe mit einer 0.5mm Nozzel mit 1mm Schichthöhe gedruckt.
Dekorativní rámeček na zásuvku nebo vypínač.
Make a bold statement at your next event with this Star Trek Classic Communicator inspired Business Card Holder. This cardholder is the perfect way to showcase your business cards in a unique and memorable way. Durable and eye-catching,…
This is a minimalist stand for the Star Trek original series flip-up communicator. It holds up the communicator at a 45 degree angle for display and the holders stay out of the way as much as possible. It allows the communicator to stay…
This is a remix of the communicator designed by welshmnky found at https://www.thingiverse.com/thing:3021759 . I can't seem to link it using Thingiverse, so here it is. I designed each piece to be able to be printed separately in…
Wanted to design my own version of this communicator. It's a bit too small for a 3D printable spring so its just manual opening for now with no way to latch it shut. Lid has a split version for flat printing and a full one for upright.…
From the Original Star Trek TV Series
This is a remix of the 'Star Trek Voyager Communicator' by 4ndreas, which can be found here. You can use this file, in combination with raft layers and a mid-print pause to make a Star Trek Communicator badge with a pin back encased in…
Learning starts in the early ages with communmication! :) From time to time I give some lessons at a local shool for learning disabled kids. Some Day they asked me to design a mood scale to help to achieve a better communication with some…
Communicator Holster from Star Trek: Beyond Sand the pieces. Prime and paint. Repeat as necessary..... Glue the clamp between the small marks. For better adhesion do not paint the back of the clamp and the space between the marks or…
Here's my version of the Klingon communicator prop. It's a simple model and easy to assemble. The lid has a cutout area that you need to be careful about removing the supports at. Display stand included. Filaments used were Prusament…
Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…
They Live - Alien Communicating - 1988 3D printable model.
Display stand for LimeyBuilds excellent COMMUNICATOR replica. Taking design and colour cues from the show sets, this display stand holds your communicator in style until your next away mission. Stand will press fit together once primer…
Pics once I print it! Apologies for the simplicity, I just used TinkerCad for it.
Star Trek Next Generation Communicator Badge Earrings Star Trek Next Generation inspired earrings based on the communicator badges. Two print profiles: Full colour and single coloured. Material: PLA Print recommendations: I recommend…
Seriously, don't sue me Bro!!! It's a calicat but with a horn. It's an evolutionary advantage to deal with the dreaded calicorgi. Now in a Stackable Form!!! Remixed from my remix from that other place.…
My fire department upgraded to the Unication G5 series pagers. We did not get the charging bases with them, so I designed a base for mine. The pager fits, doesnt wobble, and isnt too tight. The cutout in the side allows the charging cable…
StatWall Shelf with Price Ticket Holder - Piano per parete attrezzata con slot porta comunicazione Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our…
Another 'control panel', a WIP as I wanted to make the buttons tactile enough to operate micro switches behind them.
A 3D printed model of a wireless charger that recreates the holographic communicator from the Star Wars universe. Specifically, Qui-gon Jinn's communicator from The Phantom Menace. The model is created to the specifications of the…
Communication box, used near railway crossings
Gently remove the brackets. You can use a cutter to cut them.
IDF Nagmachon “Doghouse” – Late APC, communication version a.k.a Heavy CHAKA
I love RYOBI tools. Primarily because they share a common battery. I have plenty of them charged up and ready to go. I can't tell you how many times I have picked up some device that I haven't used in a long time and the batteries are…
These picture language tiles could be used as signs or wall art, but I use them with my autistic child as a means of communication. I used DALLE3 to try to generate images that were as clear as possible to associate with words. I am not a…
[EN] Cable grommet for Schnaider Unica series frames. To assemble, you need to supply 45mm of stripped wire with a cross section of 2.5mm, or two M2 screws as hinges. It is then inserted into the frame between the metal insert and the…
For the print in place version it is called “Open Communicator Fridge Magnet” and should be printed with the lid as the only face touching the build plate. (Note this is almost 2.56 degrees off from how the model will be imported. A…
A box to store Cardo Communicators, fits 2 Cardo units (Spirit and Freecom model)
This model is compatible with the lego system.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is a mounting plate for the "E1" style of motorcycle communicator systems that can be found at the usual suspect websites. I purchased one recently however since I have 2 helmets I use, I needed an extra. I attached the Fusion file…
A rough model of the Clicks Communicator smartphone, with a minor change to make it easier to print. Can also support manual 2 color printing, if you want.
[CZ] Krytka pro prostorový snímač teploty do rámečků Schneider UNICA. Krytka se vkládá pod barevnou vložku v rámečku tak aby byly otvory vertikálně orientovány, čímž se zajistí proudění vzduchu okolo snímače. [EN] Cover for room…
Features: Lower Key Height / More Ergonomic Keyboard Raised outer ridge to prevent accidental keypresses Recessed power switch Alert buzzer Textured Grips / Edges Sunshade for Screen - Also provides protection and prevents accidental…
A quick and dirty case for the HiWave BMR12 Speaker - a compact full-range speaker. This is nice to use as an external speaker for radios, and there's a bit of extra room in the case that could be used for a small audio amplifier as well.…
HO Scale Spacers used to build Comunications Tower with Cell and microwave Antenna Using florest wire the spacers make a HO Scale tower. Cell and microwave antennas included My source of Model train things is WWW.RailGoose.com Print…
Model showing the Principle of Communicating Vessels . We pour the colored liquid and explain it to interested students :-). Printing from transparent material. More filling will provide better transparency - then there are no air…
Atakule is a 125 m (410 feet) high communications and observation tower located in the Çankaya district of central Ankara, Turkey, and is one of the primary landmarks of the city. As the district of Çankaya is itself on a hill, the tower…
You will need to glue in some magnets on the small holder to hold the communicator up while standing. Use some diameter 8mm magnets fo this. For the logo i used following thing 3332294 from thingiverse //…
Hardware and links: Wio Tracker L1: https://www.seeedstudio.com/Wio-Tracker-L1-p-6453.html 4x M3 16mm (case) 2-4 x M2 8mm (wio) M5Stack CardKB Mini Keyboard:…
Worn by officers of the New Republic Navy (like General Hera Syndulla and Captain Carson Teva), this greeble appears to be some sort of communication device. My version is based around screenshots from the series posted by Wonkybonkers…
This should fit most deathwatch or pre beskar Din gauntlet models out there. Best for resin prints but should print at .16 layer height on fdm printers with a high infill %.
Shout out to Slabua , building his Heltec v3 case introduced me into LoRa , got me curious about CAD and thus helped lead me to this creation; thanks for sharing your build ! This folding case fits the Heltec ESP32 V3 LoRa board intended…
For use in your Tadano cosplay! , Ive noticed there was no 3d model of the flower Tadano has on his hair so i easily modeled one. i used a hair clip i got from wallgreens
This is my first fully custom model, so feedback will be very helpful. I needed a in-wall cable management cap for Schneider Unica Studio but Schneider only provides a hard wire solution (opening for only one cable and pricy). Had a lot…
I wanted a more minimalistic stand, without the signage- so this is a little mod to reduce the size of the base.
When training eye gaze communicators, having a viewfinder can be helpful. They allow the user to identify the target, focus their gaze, and active the appropriate button. Part Hardware Required Quantity Large View Finder M2x 12mm 1 M2 Nut…
Cable grommet for New Unica – 3 different types. Easily snaps into Schneider frame and holds firmly.
About this T-Deck Build & Enclosure I designed this build to support all the major Blackout Comms features without requiring any soldering. If you're able to find the exact parts in the parts list, it's basically just plugging components…
Icons are property of Blizzard Entertainment. I recommend printing icon side up as the icons protrude. (Apologies, the stls are all up side down)
This customizable cookie cutter is inspired by the classic communication candy hearts. The cookie cutter includes the cutter and the stamp. This makes it work well no matter how thick you roll out your cookie dough. Twenty example stamps…
from the Original Lost in Space Doctor Zachary Smith's Aeolus 14 Umbra Communicator as seen in the first two Episode
Star Wars Andor season 2 TV show, published a promotional magazine, called 'Rebelion an ANDOR zine'. In it was a page of 'micro-props' that I liked the look of so have recreated them to be 3D printable. I have allowed for M3 knurled brass…
Beam the toothpaste to your brush with this Star Trek Badge Squeezer. Three slit thickness options 1mm, 1.5mm or 2mm. Printing Tips: No supports needed. The models are easily scalable. The slit width can be adjusted via "hole expansion"…
A very basic desk cradle to hold a SpotX handheld satellite communicator. I have a charging station for handheld radios and needed something to make the SpotX fit in next to my other gear.
The problem I was trying to solve was that during reconstruction we forgot to place one switch and it was simply not feasible to add it later. The solution was in using a Shelly relay in combination with a smart switch. Since we use…
Magnetic Star Trek Starfleet insignia communicator Place a round magnet with a max. dia. of 8 mm and a max high of 3 mm into the print when it pauses. If yoo use the stl add a break at a high of 3,8 mm To fix it on your shirt, take…
Communications hatch for german panzer Panther Ausf.D, with rainguard and rivets. 1/10 and 1/16. Ideal for heng long, taigen, torro, tamiya or scratch building RC. Design based on Panzer Tracts 05-1 book.
Schneider Unica - Sonoff Motion Sensor Holder Simply like the original :-) Ideal for DLP/SLA/LCD printers
This is a Sith Communicator Prop made for my 2017 Cosplay at PHX Comic Con. It Prints with it's Belt clip of which I would Epoxy in and let sit for 24-36 hours before wearing. This is not intended to be a screen accurate prop as it is…
I use it for RC races to speak with my mechanic. Built with an EJEAS V6 Pro+ and a cheapo hearing protection headphones
from the 70's TV series “The Invaders” small simple Model of the Alien Communicator the Model is hollow to had electronis use five 3mm LED's in various Colors for the Lights
Mounts to the battery case with M4 bolts and nuts. Check collections for other files.
Modified base, trim and top to accomodate 5 dice
A smal and simple holder for the Polarion GMS
I always thought it could be fun to make 3D versions of these, and I finally got a request to do just that. We matched the colors to the original paper symbols the student was using, but you can change the colors as you see fit. This is a…
Tokens to replace the Interception and Miscommunication tokens that come with the game Decrypto. I have found that new players sometimes confuse the white and black tokens as points for their respective teams, so I made these to make it…
The original design is by Richard Handy and the concept art used for reference was featured in the Doctor Who Impossible Worlds book (pg. 252). The current design does not allow for functional LEDs, but I did include two holes on the top…
Alien Vase with Hydrogen Hyperfine Transition Communication Symbol The vase front displays an alien face, and the vase back displays an alien communication symbol. The communication symbol is a modified version of the symbol used on the…
This is a top hat style potty that I made for using with my daughter shortly after she was born. My wife and I were planning on doing elimination communication (EC) with her. We used this potty maybe once or twice. We ended up finding it…
null Category: 3D Printing
Communication accents, towers, and constructs. Used to create a Comm's building. The blue bases are the caps from soda bottles or other round containers. The antennas are toothpicks. Other models from the Pre-Fab collection can be found…
Created for my wonderful grandson who has been inflicted with a terrible disease by the name of metachromatic Leukodystrophy that is chipping away at his motor skills. I have seen him smile so brightly over so many things that I have been…
This is the plastics for the CYD version of my AAC communication device version 3.0 It has a common software base and runs on several embedded processors with a lot of screen options and input options. I recently found a CYD kit and…
Oui / non Sans dérangé la classe par une réponse verbale, la personne aidante peu savoir si l'élève à besoin d'aide ou pas? juste avec l'orientation du bloc. (oui ou non vers l'assistant(e) ) Si vous n'avec pas de multi matériaux…
