1 / 11
Schneider Unica - Cable grommet / kabelová průchodka — image 1
1 / 11

Schneider Unica - Cable grommet / kabelová průchodka

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cable grommet for Schnaider Unica series frames. Kabelová průchodka do rámečků Schnaider řady Unica.

Rating
0 / 5
Likes
19
Downloads
71
Makes
0
Views
745
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

[EN]

Cable grommet for Schnaider Unica series frames. To assemble, you need to supply 45mm of stripped wire with a cross section of 2.5mm, or two M2 screws as hinges. It is then inserted into the frame between the metal insert and the decorative frame. The hole is also large enough for a DVI connector to be pushed through.


For a better appearance, it is advisable to print with a lower layer and possibly sand and repaint after printing to create a smooth and glossy surface.

 

 

[CZ]

Kabelová průchodka do rámečků Schnaider řady Unica. Pro sestavení je potřeba dodat 45mm odizolovaného drátu o průřezu 2,5mm, nebo dva šroubky M2 jako panty. Poté se vkládá do rámečku mezi kovovou vložku a ozdobný rámeček. Otvor je dostatečný i pro prostrčení DVI konektoru.


Pro lepší vzhled je vhodné tisknout nižší vrstvou a případně po vytištění přebrousit s přelakovat pro vytvoření hladkého a lesklého povrchu.

Tags