Counting matching models…
>> Winners << Win Original Prusa i3 MK3S+ and a hundred of other prizes! To participate in this competition, you need to fulfil two steps: Use the provided image of Captain Bad Advice to create a collage of him getting involved in amusing…
A remix combining the good flying properties (my experience) of the Flying propeller toy by Harald Andersson and the coupling mechanism (square 5) of Strong Flying Propeller by Meister Edel I made this remix after testing for use with my…
commercial use This model is not released for commercial use. If you want to sell products related to this model, commercial licenses are available via direct message. description a printed case with a integrated belt clip for a motorola…
Parental Advisory Explicit Content logo in 3D. 5mm high.
Anatomicky přesný model ledviny s močovodem vhodný i pro výuku ve škole
I ran the print at 0.4mm nozzle and at .18 layer height. I did the print on my Ender 3 so I had to pause the print at the right layer height to change the filament. But print it to your liking and your preferred settings!
The Sandvich from TF2 arrives! This model stays mostly true to the original sandvich outside of some moving around of pieces so they don't clip into eachother, thickening walls, and flattening the bread a bit so it can sit flat on…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I had the original handle break so I modified it to be stronger. I also made it so a bigger spring fits in it.
A 608 bearing is needed for this spinner. Check out my other fallout themed spinner. https://www.thingiverse.com/thing:2346966 Print Settings Printer: CTC Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Category: Toy & Game Accessories
English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…
This was a commercial project I worked on for a company but it is finished and now I have the right for distributing my work. If you want to buy this kit professionally printed, you can send me a message and we can arrange it. There is an…
Ive designed a little stand for the charger of the Motorola Advisor TPG2200 with space for an Shelly 1 smart switch. You can configure the shelly as an sensor so you can switch on smart devices when the integratet relais. You need the…
Dust cover for male DVI connectors usually found on graphics card and adapters. The print will fit tightly and will benefit from being printed in a soft ish filament. (Not TPE not PLA) Print Settings Printer Brand: RepRap Printer: Ormerod…
A remix of a Motorola Advisor TPG2200 Homestation designed to house a D1 Mini microcontroller for esphome compatibility for homeassistant . This allows you to craft all sorts of smart home automations via homeassistant when you get an…
We were tired of always searching for pacifier in the dark so I made a bin for pacifier (or whatever you want to put in) which clip on the side of the Sundvik crib. The bin is in two part to allow for no support but a small assembly. I…
I made it for my friend, now i will try to print it. It's for 10 x 15 cm big hole. Edit: Click paws are now lower for weaker walls. Instructions Now is possible to change wall thickness on third line of "doors-margin.scad" file SCAD code.…
Your adVintage Fedora deserves a worthy stage! This is the answer: I am proud to present the latest addition to my Printables collection of 3D models – the adVintage Modular Hat Stand . It all begins with the ring . Designed in close…
This is book holder design to clip on the side of the IKEA Sundvik crib. I made two version. A plain one (easier to print) and a honeycomb version. The honeycomb is 25% lighter than the plain version, it's easier to see the book in the…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
to avoid a cable break at the plug of the power supply. Print instructions Category: Computer Summary to avoid a cable break at the plug of the power supply. Print Settings Printer: Anet A6 Bowden Rafts: No Supports: No Resolution: 0.2…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA Default White Transmission Distance: 5 Swap…
Quick model release; Buffalo Steak Sandvich! Though it's not really a sandvich is it? Anyways wanted to get atleast one prop for every single class slot out before i decide to make everything else TF2 has to offer! Next upload (right…
You can display graphics and images to an external monitor with the Feather RP2040 DVI. This Feather RP2040 has all the goodies you know and love plus digital video output that will work with any HDMI monitor or display. It features the…
I was going to just clean up the couple of small issues I had with the original but Tinkercad refused to import the original or the PBI port door it was remixed from. I took the simple approach and just drew it again. I've done this in a…
I had difficulty finding any models for the REDARC RedVision LCD display so I made this model. This has a hole in the back if you want to screw fix it to a wall or something OR ive allowed for magnet slots in it two slots in the top…
When to turn on the washing machine and the dryer? I built an electronic advisor with #esphome , connected to #homeassistant , which tells my wife and me in a traffic light style when it is the optimal time to turn on the #washingmachine…
Today an acquaintance of mine sent me the following image: I just had to make a sign of this. So here it is! New version: fixed typo.
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
IKEA Sundvik Crib - Height Increaser I needed to raise the bed by 60 mm and therefore made this one. It becomes a total of 100 mm where 40 mm is a tight fit around the leg. Print instructions Category: Household Print Settings Printer…
Hello everyone, I have vectorised a illustration of the s75 air defence system and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the…
A Case for the LS-7 Touch Display distributed by Pollin- Elektronik here in germany. There are plenty "same-model" offers on aliexpress. The four little placeholders are optional. Just do me a favour... don't look to close and wonder…
Profile map of the Leadville 100 MTB course (Pre 2023 route). Fun way to commemorate the race. Easy to add your own text with date and finish time. Added a filament change in the attached gcode.
Simple tiktok gravity knife, requering two M3x20 screws and two M3 nuts. Sharing as an .step file for everyone to modify the tolerances if needed, my printer can be a little rough when it comes to printing files with dimensional…
It is easy print with no support material. Holes for M6 screws are without thread but the screw will cut its own thread (no need to tap the hole). To assemble you will need: -4x M6x12mm IMBUS screw -1x 60x60 casters with or without a break
This model will raise the SUNDVIK table by 6 cm. It is based on the model that will raise the crib by 6 cm, just other measurements to fit the legs of the table.
This is a remix of TG Tom's great E1 Mount with a modified width of 27mm to accomodate an IKEA Sundvik baby bed plus felt glider insert. Use M3 screws and nuts to mount the official mount that comes with these cameras. Thanks to TG Tom!
Advice Plate with Neodyms to mount on a Gasbottle Hinweisschilder mit Neodym Magneten zur Anbringung an Gasflaschen
MADVILLAINY - Madvillain Album Cover Art (2 colors) Please DM me for hfp files for hueforge Project: MADVILLAINY.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You may…
---CZE--- Ahoj všichni Pokud máš rád rc autíčka tak jsi tady správně navrhl jsem tento otočný samojistící držák na jakýkoliv rc podvozek. na složení budeš potřebovat 4 kusy m3 x 30mm šrouby 4 kusy m3 matic a 1 kus m6 x 60mm. šroub m6 x…
This custom-designed bracket mounts directly to the upper trim panel above the rear window, providing a clean and secure mounting solution for most traffic advisor light bars. It offers a low-profile, factory-style appearance while…
Divertido calendario de Adviento donde papa noel baja la chimenea hasta el día 24 que llega a casa. Una manera informal y decorativa de enseñarles a los pequeños de casa y no tan pequeños cuantos días tardará papa noel en llegar. Archivo…
100x160mm sign, reading "Take my advice: I'm not using it" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
English: My wife wanted to hang bag on IKEA SUNDVIK cot. So I made one massive for her. Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Žena chtěla na postýlku IKEA SUNDVIK…
I created this model because while the KVM was on the desk: The weight of the DVI cables made it pop up in the front. The cables from behind the desk were unsightly. The holes on the side allow for mounting using the built in rack mounts…
This is a replacement door for the back panel for the Atari 5200 for those looking to install Sophia 2 which has a DVI-I port! It takes some effort to take the old one out, and then pop this one in (takes a bit of effort). I printed with…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Gray Transmission Distance: 2.2 PLA American Filament Classic White Transmission Distance:…
Sonic's advice about not feeling down about valentine's day Backlit with a simple waterproof led strip
Paleta a bedna, která se na ní vejde. Na popud mého syna který chtěl k VZV z TEDi další palety a bedny, že si vytvoří sklad. Regály příště...
If you want to achieve a 5% inclination of your IKEA SUNDVIK cot for your baby, you can use this leg extension. Model contains also 2 holes for wood screws.
The Fish model I created for the WoWs contest. On all the videos Cpt. Bad Advice appears with The Fish - so I needed her because they look much better together :) Printing without supports is possible. Fish tank is made of rubber ball.…
"the enderchicken" once asked: "what about a bcar with bearings arrange like a rippcar" And so here it is. Quadvictus was used as the base because I never got good results from the trivictus variant, and you get a choice of triple o ring…
this was quest for my friend, to replace lost cap to his outdoor waist water bottle, there was not any brand, hope someone find it usefull, it had unusual (to me) pipe thread, almost one inch diameter, “O” ring fits to the bottom of the…
Remix - made it a bit smaller and shortened the jaws - it now clamps onto a 2040 aluminium extrusion (perfect for the top of my Tevo Tarantula) I printed this at 25% infill, you can increase/decrease this to make it more/less flexible.…
Mounting bracket for a StarTech 2 Port DVI KVM (D86A2-2-PORT-8K-KVM) switch. Printed in Prusament PETG Galax Black
Reolink Baby Camera Crib Mount for IKEA Sundvik Safely monitor your little one with this custom-designed mount for your Reolink baby camera and IKEA Sundvik crib! Attach your Reolink baby monitor to the side of an IKEA Sundvik crib.…
Pro snazsi otvirani a zavirani dveri od Ikea Lack stolku.
I never got a chance to take photos of the actual sign, because I gave it to my friend at school. You can use it to put it on your door when you are trying to sleep or put it on someone's door to troll them (jk). In the slicer, you need…
100x160mm sign, reading "Parental Advisory: Explicit Content" as the record warning label Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which…
This model is a replica of the original IKEA designed by Inma Bermudez, I did it in fusion360 after accurate reverse engineering of the design. The few differences (in the inside, so invisible) are for the printability of the model. The…
The stand is designed to raise small nursery pots with the plant above the rim of the Ikea GRADVIS vase. Personal experience: I'm using the stand for my small hanging plant at its tremendously boosted its growth since I fill the bottom of…
Diese Trenner werden mit einem zwischen Brett in der Schublade verschraubt.
Preface (scroll to the bottom for issues and TL;DR) Grab yourself a cup of coffee or tea because there will be a lot of reading going on. This is an article, not a description lol. This is just a heads-up before we start. If you simply…
Secure & Practical IKEA Light Holder for SUNDVIK Crib Enhance your nursery with this sturdy clip-on light holder designed specifically for the IKEA SUNDVIK crib . It allows you to attach the IKEA EBBARED light without the need for screws…
I wanted to do some custome changing table for our newborn. Because we dont have very much space in our flat i decided to do it difrently. I drawed a hinges and bearing surfaces and printed it (the files are here). The rest is on you. You…
I often make mistakes by trying to do things too quickly, whether it's in my 3d models, programming, packing—really everything. getting into a rush is a bad idea. so, I made this to remind myself to take a little more care when I am in a…
This is my first designed case for the Alphahound AB+G radiation detector. The model comes with optional front, back and USB covers. My Alphahound is one of my EDC. While the body of the Alphahound is robust, I carry it in my pocket and…
Vysokozdvih (ještěrka) od výrobce hraček Bruder - kostka zadní rejdovací nápravy.
I recoment to use the .step file to print it is simpler to get the text in a diferent coler at least in bambu slicer. I printet in ABS with 5 walls, 5 Top/botom layers and 20% infill
Dvierka sú určené do interiérových dverí, aby sa mohli mačky voľne pohybovať po dome, byte. Sú navrhnuté na hrúbku dverí 40 mm, alebo ak majú stredovú dosku 17 mm (ako je na obrázku). Tlač z PLA, 0,2 mm. Viete ich vytlačiť aj na Prusa…
sv. Hedvika Slezská - tradiční patronka Slezska a Polska 8cm vysoká Saint Hedwig of Silesia, traditional patron saint of Silesia and Poland 8cm high
Built around an empty filament spool, MajorDomo is a small geodesic dome lamp that sits by the door and answers one very practical question: "How should I dress to go outside?” You can never tell just how warm or cold it is just by…
Uses an Ikea bell cloche (Morgontidig), to stack on a Gradvis plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued.…
Pant na dvirka k pude pokud je malo mista
1. For the raised text version: “The text is already raised; don’t raise my blood pressure too!” 2. For the flat text version: “The text is flat, but my patience isn’t. Keep your advice to yourself!” 1. 凸面版表達：「字體已經凸了，心情不想再被推凸！」 2.…
This is a set of prints that will house Xprite 52026Ts , which I was able to find in an 8 pack. The light facades fit snugly into aluminum architectural U-channel that I got off McMaster , but will need to be weather sealed. I used a…
I had my own North Atlantic Fella Organization patch concept based on the famous 1990s album parental advisory stickers. That wasn't available for purchase, so I designed and printed it myself. In NAFO, "bonking" is the highly active…
Protect and style your IKEA NORDVIKEN chair with this custom 3D-printable cover! Designed for a perfect fit, it adds a sleek, modern touch while safeguarding edges and corners. Material: PLA
Detailed 3D printable Magic 8 Ball Indecisive Advisor figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
Model jsem vytvořil, protože mne štvalo jak se desky všude pletou. Držák má 9 pozic, takže se do něj vlezou všechny desky + 2 desky zůstávají v sendvičovači. Tisknul jsem z PETG v řezu uprostřed s konektory.
Rozměry: 70 × 100 × 15 mm Soubory: STL pro tisk a OpenSCAD pro úpravy. Doporučené výchozí nastavení tisku Materiál: PLA Výška vrstvy: 0,2 mm Výplň: 15–20 % Stěny: 3 Orientace: spodními ližinami na podložku Podpěry: podle schopnosti…
Dvierka sú určené do interiérových dverí, aby sa mohli mačky voľne pohybovať po dome, byte. Sú navrhnuté na hrúbku dverí 40 mm, alebo ak majú stredovú dosku 17 mm (ako je na obrázku). Tlač z PLA, 0,2 mm. Viete ich vytlačiť aj na Prusa…
This is a set of prints that will house Xprite 52026Ts , which I was able to find in an 8 pack. The light facades fit snugly into aluminum architectural U-channel that I got off McMaster , but will need to be weather sealed. I used a…
This custom-designed bracket mounts directly to the upper trim panel above the rear window, providing a clean and secure mounting solution for most traffic advisor light bars. It offers a low-profile, factory-style appearance while…
Built around an empty filament spool, MajorDomo is a small geodesic dome lamp that sits by the door and answers one very practical question: "How should I dress to go outside?” You can never tell just how warm or cold it is just by…
Paleta a bedna, která se na ní vejde. Na popud mého syna který chtěl k VZV z TEDi další palety a bedny, že si vytvoří sklad. Regály příště...
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
"the enderchicken" once asked: "what about a bcar with bearings arrange like a rippcar" And so here it is. Quadvictus was used as the base because I never got good results from the trivictus variant, and you get a choice of triple o ring…
Protect and style your IKEA NORDVIKEN chair with this custom 3D-printable cover! Designed for a perfect fit, it adds a sleek, modern touch while safeguarding edges and corners. Material: PLA
When to turn on the washing machine and the dryer? I built an electronic advisor with #esphome , connected to #homeassistant , which tells my wife and me in a traffic light style when it is the optimal time to turn on the #washingmachine…
I recoment to use the .step file to print it is simpler to get the text in a diferent coler at least in bambu slicer. I printet in ABS with 5 walls, 5 Top/botom layers and 20% infill
obycajne madlo na dvierka skrinky jednoduche
IKEA SINDVIK door handle. 80mm in length but easily edited to whatever length you need.
Design for Ikea Sundvik bed. Slides onto the side rail to hold a water cup/bottle and extra small items. Requires supports.
A mount that allows you to hide the adapter inside the case, and also brings out the sound output on a chinch connector.
Original plugs get weak as the self tapping screws cut into the thin wall. This model has the wall thickened and thread partially pre-modelled. The thread is just lightly undersized for snug fit.
