PaperMesh StandAlone Communicator (Vision Master E213)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Standalone communicator for the Vision Master E213
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 268
- Makes
- 3
- Views
- 3,934
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Disclaimer:
These models are intended for personal use only.
Do not copy, sell, trade or gain from these files and designs.
This means you can print for yourself, for your family members, friends and make the devices and give away the printed enclosures for free to them to built the Meshtastic community but cannot gain financially from the sales of them.
Description:
I created this design to be as slim as possible and require no screws, to do this I had to use very specific parts and very tight tolerances. Follow the list of materials if you'll like to replicate it. Let me know if you have some input that may improve this design. Detail instructions will be added later.
List of Materials:
- Vision Master E213 - https://heltec.org/project/vision-master-e213/
- 5000mah battery 706090 - https://a.co/d/eTImDH5
- m5stack CardKB - https://www.digikey.com/short/bc72vhw5
- GPS GT-U7 - https://a.co/d/0YqeZ9E
- Passive Buzzer 9042 3V 9x4.2mm - https://a.co/d/inMNhpI
- Silicone Keyboard Cover - https://www.etsy.com/listing/1772533422/cardkb-silicone-cover
- PLA
Keyboard Tray:
- To achieve the dual color letters, you must be able to change the filament on the layer where the letters end on the Keyboard Tray. Tray must be printed with the letters faced down.
- Put Silicone Cover onto Ketboard tray
- Solder the provided I2C cable onto the CardKB
- Slide the CardKB into keyboard tray.
Electronics Instructions:
Coming soon…