Router Adaptor for Makita/Festool Guide Track
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model allows a (plunge) router, fitted with a 30mm guide bush, to be run along a Makita or Festool guide rail.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 157
- Makes
- 0
- Views
- 1,315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model allows a (plunge) router, fitted with a 30mm guide bush, to be run along a Makita or Festool guide rail. The router mount is drilled, in addition, to attach directly to the Makita trim router plunge base, and to the Hitachi M12V2 router. A locator (2 required) positions the track so that the router cutter is centred between the rows of a standard MFT.
The .step file is included.
There are 2 components to the guide itself:
- The router mount (Router guide (1).stl).
- The rail guide (Track Slide.stl)
The two parts are printed separately, top face down. Then no supports are required. They are fixed together with M4 csk screws into heat-set threaded inserts.
The locator is printed as a single piece, top face down. The hole in the locating peg takes an M8 screw, to strengthen the peg.