1 / 4
Impossible Hat passthrough illusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This hat is a passthrough illusion vortex which also serves as a torture test for your printer.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 149
- Makes
- 2
- Views
- 600
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Hat is inspired by RJ Design's impossible cone.
The tip (inner part) has a 0.5 mm gap in X and Y directions to make it run smoothly. However, the bottom part has overhangs that demand your printer be well calibrated. You could use support for those first overhangs.
I printed it using PLA, with a 0.6 mm nozzle. 2 walls (0.7 mm width), 2 bottom and top shells (0.28 mm layer height).
Have fun and let me know your thoughts in the comments!
B.