Tiny Enclosure for TinyMaker

This was a project I set out to make it a bit safer to print at home using my TinyMaker resin printer. The design has a magnetic front door and top lid for easy access to the box. The sides of the box feature magnetic vent attachments to either cover completely or to attach a hose for venting fumes to the atmosphere.

I don't tend to design too much so there are absolutely things that could've been done better or easier. Feel free to tweak the design as you see fit. I've included an export of the Fusion file as well if you're well versed. Just please attribute if you modify anything.

When gluing magnets, it's a good idea to glue a set, stick the second half on top, and mark with a sharpie so you can match polarity. Glue the sharpied side down on the other half. Eg: Glue the ones to the main body, marker, glue other half to the door.

For the hose attachments they were obtained here without any modifications: https://www.printables.com/model/274787-magnetic-quick-disconnect-ventilation-system-for-r/files

Parts you'll need/

https://www.amazon.com/dp/B08FYB6MVH
https://www.amazon.com/dp/B000BQMMFY

https://www.amazon.com/DIYMAG-Refrigerator-Magnets-100-piece/dp/B0753ZPBLQ

M3 Bolts and Nuts needed for host attachment - https://www.amazon.com/HELIFOUNER-Pieces-Button-Washers-Stainless/dp/B09WJ1C8JP

If you don't have access to a laser cutter, you'll need an 80mm drill hole similar to this - https://www.amazon.com.au/Bi-Metal-Drill-Cutter-Arbor-Metal/dp/B07R8YGJCT

4" Vent Hose - https://www.amazon.com/insulated-flexible-Heavy-Duty-Protection-Ventilation/dp/B07GSRCNHK

4" Duct Fan https://www.amazon.com/gp/product/B0C7Z82L7P