Poop Box for Bambu Lab A1 Mini with Quick Disconnect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Poop Box for Bambu Lab A1 Mini with magnets and guides for easier operation.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 189
- Makes
- 2
- Views
- 959
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a poop box for the A1 mini but couldn't find any design with magnets so I designed my own. Also, it serves as a stop (or a good reference point) if you're putting the printer against a side wall. The receiver has a slight angle that fits the side of the printer.
You'll need:
- Double Sided Tape.
- Two 4 x 2 mm magnets.
- Two 6 x 2 mm magnets.
- Recommended: rubber pads for the box.
Printing:
- No supports needed.
- It's 178 mm long to fit the A1 Mini build plate.
*You can test your printer capabilities with my QuBenchy - 3D Printing Torture Test Cube:
Assembly:
- Glue the magnets into place (careful with the polarity)!
- Optional: add the rubber pads to the box.
- Apply the double sided tape to side plate.
- Join both parts using the magnets and place them next to the printer.
- Align the pieces with the printer (in height and depth), and push to stick the side plate to the printer.
- Done!
Feedback is welcome. Cheers!
------------------------------------
Rendered in Blender, using Blender Boom's Desk Scene and @Az3Dip's Ender 3.