Poop Box for Bambu Lab A1 Mini with Quick Disconnect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop Box for Bambu Lab A1 Mini with magnets and guides for easier operation.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 959
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a poop box for the A1 mini but couldn't find any design with magnets so I designed my own. Also, it serves as a stop (or a good reference point) if you're putting the printer against a side wall. The receiver has a slight angle that fits the side of the printer.
You'll need:
- Double Sided Tape.
- Two 4 x 2 mm magnets.
- Two 6 x 2 mm magnets.
- Recommended: rubber pads for the box.
Printing:
- No supports needed.
- It's 178 mm long to fit the A1 Mini build plate.
*You can test your printer capabilities with my QuBenchy - 3D Printing Torture Test Cube:
Assembly:
- Glue the magnets into place (careful with the polarity)!
- Optional: add the rubber pads to the box.
- Apply the double sided tape to side plate.
- Join both parts using the magnets and place them next to the printer.
- Align the pieces with the printer (in height and depth), and push to stick the side plate to the printer.
- Done!
Feedback is welcome. Cheers!
------------------------------------
Rendered in Blender, using Blender Boom's Desk Scene and @Az3Dip's Ender 3.